SONY DSC

DARE (TU-Delft) built two CanSat rockets for the Dutch CanSat campaign using Parts and Supplies from REBEL Space.

FDB_8716

Most fliers for ALRS XI gathered for a photo shoot, ALRS XI was a great weekend with over a 100 flights and 3 days of excellent rocket weather.

rocket_vertical

rocket_motor_section_side

Richard Osborne (Airborne Engineering) his Nighthawk;

Richard Osborne modified a Performance Rocketry Kit (Mad Max Dual Deploy 8.0 kit with modifications) for a flight for Profesor Colin Pillinger (Beagle-2 Mars probe) for a flight with some copies of Professor Colin Pillinger his new book about the Beagle-2 Mars probe. Pictures are the courtessy of Ben Jarvis who made most of the pictures. Flight was on a Cesaroni Pro75 L1720.

Nighthawk_prep_crop-opt

Nighthawk_T-10-crop-med-opt-BJ

Nighthawk_Group_Photo-med-opt-BJ

Nighthawk_Clearing_Tower_crop-med-opt-BJ

Launch

Near_apogee

Recovery

Nighthawk_Payload_Section_Under_Parachute_crop-med-opt-BJ

Nighthawk_Motor_Section_Under_Parachute_crop-opt-BJ

Nighthawk_Motor_Section_Near_Landing_crop-med-opt-BJ

NAROM / ESA CanSat Competition 2010;

 The NAROM / ESA CanSat Competion 2010 was a great succes with teams from participating countries in the first competition were Belgium, Czech Republic, Denmark, Greece, Italy, Ireland, Norway, Spain, Sweden and United Kingdom.

Pictures were made by Kolbjørn Blix Dahle at Andøya Rocket Range.

IMG_5925

IMG_5928

IMG_5942

IMG_5943

IMG_5947

IMG_5951

Team at ESRANGE

 

SQUID Team Drop test Pictures;

deploymentSequence

towTest 2

towingTest

PreparationsForDropTest

Preparing for drop test

DSCF2523

 

The French team during the final of the “Rocketry Challenge” at Farnborough in July 2010.

Level 3 with a REBEL RapTor 6.0 by George Rogozinski;

Raptor6C

 

George Rogozinski UKRA 1142 (Level 3 now) with his REBEL Space RapTor 6.0 flanked by Pete Davey and Colin Rowe at Big Ears 2 on the 5th of June 2010.

George certified L3 with the flight of his Rapsorator.

Raptor6A

Raptor6B

IMG_5947

REBEL Space modified some PML kits for use during the 2009 and 2010 NAROM / ESA CanSat competition, this rocket is now the standard ESA EU CanSat Rocket after further modifications.

bilde2_20100302153358

First and Successful Level 3 Flight in the Netherlands;

mission_critical_launch_time_lapse

A compilation of the successful Level 3 attempt with a textbook flight and CPR recovery.

FDB_8957

 

Joost van Oranje with his Mission Critical Level 3 rocket, a first in the Netherlands, the first M launch and Level 3 flight during NSSL-005 on the 5th of June 2010 on a CTI Pro75-M. The rocket was sponsored by Logica and featured a special electronics payload that was designed and built by Logitech employees of their space division. Rocket was scratch built from Performance Rocketry Glass fiber tubing and PML parts.

RJD 2010;

 F186BLACKBEARD6.0B

The succesfull first flight of the new REBEL Space kit Blackbeard 6.0 on a cluster of CTI motors.

FDB_8750 (1)

 

The launch of the Sports Flier of Ton Rodenburg during RJD 2010 on a Pro54-K.

FDB_8764

 

CPR Recovery of the Sports Flier during RJD 2010.

FDB_8716

 

All fliers during RJD 2010 in Leipzig Germany.